Select Cutting Compound

Select Cutting Compound


Removes scratches and nibs on repaired or original painted surfaces.  Abrasive crystals break down during buffing cycle creating refined polishing agents for a high gloss.  The easy-to-use water-based, low solvent formula provides an extended buffing window with limited dust and residue for easy clean-up.  And it’s silicone-free making it safe for body shop applications.
Plus applicable taxes, shipping & handling.
*Images may be stock photos and may not represent the actual part. Part numbers and prices are subject to change without notice.

Key Benefits

- Low dust formula with long working window
- Abrasives break down for a high gloss

How to use

1. Shake Bottle before use.
2. Sand surface to P1000 or finer then wipe clean.
3. Using only a small amount in each area, polish with a CarBrite polishing pad at a low speed for 10 seconds exerting increased pressure while tilting the buffer.
4. With light pressure, polish are with flat pad for 20-40 seconds.
5. Remove any residue with a clean, microfiber towel.

For great results: Polish with CarBrite SELECT Polish and seal with CarBrite SELECT Sealer Wax.

Recommended Pads

Cutting Compound: CBA0008 6.5" Heavy Cut Foam Pad, CBA0011 6.5" Lamb's Wool Cutting and Polishing Pad.

Polish: CBA009 6,.5" Medium Polish Foam Pad, CBA0011 6.5" Lamb's Wool Cutting and Polishing Pad.

Sealer Wax:  CBA0010 6.5" Final Finish Foam Pad

Recommended Equipment

FLEX Positive-drive Orbital Polisher CBA0018